New Equipment - OMM Marchetti Post Press
CLICK ON PHOTOS TO ENLARGE
OMM MARCHETTI MODEL PHOENIX PERFECT BINDER
Book size min./max. L x H 120 x 110 / 380 x 320 Cover size min./max. 120 x 220 / 380 x 700 Block/spine thickness 1 – 50mm Cycles per hour 200 Milling minimum (single sheet) 0.5 mm Milling depth (folding paper) 2 mm (optional) Paper chip suction device PUR/ Hot Melt for gluing milled or sewn book spine and gluing one or two sides of the book block individually selectable Capacity of tank PUR/ Hot Melt – Kg 1 Cut-off glue -spine and side Automatic clean and seal device for glue applicator unit Nipping station -self-adjusting manual handling or electrical (optional) Power requirement 220V/single phase-‐50/60 Hz-‐ 15 amp Machine dimensions 50” L x 32” W x 43” H (standard) Machine Weight: 530 lbs. Electrical requirements 220V/60 Hz/1Ph
OMM MARCHETTI POST PRESS
- Columbia G Stapling Single Head Machine
- Columbia M1 Stapling-Single Head Machine
- Galaxia M1 Stapling Machine-2 heads
- Electric drill sharpeners
- Soyuz Manual Spine taper
- Vega Automatic Spine Taper
- Endevor Semiautomatic Creasing
- Mini Endeavor SemiAuto Creaser
- Progress 1 Manual Rotary Creaser
- Discovery Manual Perfect Binder
- Vicking Round Corner Manual
- Vicking 2 Round Corner Manual
- Vicking 3-1 Round Corner Motorized
- Hercules 2 Round Corner Motorized
- Mini Mir Manual laminator
- Mini Mir + FR35 laminator
- Plast 52 Super Laminator
- FR35 Friction feeder
- Atlantis 52 High Pile Auto Feeder
- High Pile Stacker 52
- Cut 52 Cutter
- Skylab 3 head paper drill
- SuperSkylab 3 head paper drill
- Sliding table on drill
- Automatic Table for Super Skylaonly
- Conveyors
OMM MARCHETTI MODEL CONCORDE- 3
Single Head Drill • Includes Programmable Hyper Table• Ability to program and store 100 jobs• Includes optional Foot Pedal for operation• Minimum distance between holes: 8mm• Motor: 0.9HP; 220/380V; 3 Phase• All tools and manuals• Drilling Depth: 70mm• Drilling Thickness: 40mm• Drill Sizes: 1/8” to 9\16”• Net Weight: 308 Lbs
OMM MARCHETTI CENTAUR 52 FULLY AUTOMATED SYSTEMS
OMM Marchetti Model PLAST 52 Working width- 20 inch max.Processing speed electronically adjustable up to 23 feet per minute.Plast 52 is supplied with upper and lower rollers heater only; as option it is possible to add heating plates allowing the preheating of the film, mainly employed for digital print by toner.Separate thermostats to set each working temperature, both for rollers and for plates, ranging from 0 to 320 F.Two adjustable blades for trimming edges laminated sheet. waste is automatically wound onto a roll.
PLAST 52 can operate on one or two sides simultaneously. As standard the machine is equipped with a perforating station allowing for manual separation of the sheets; The unit is arranged to take two reels of 1500 m/each, film thickness 25 to 250 micron. All functions are controlled by a digital display computer UV COATING OMM Marchetti Model Odyssey The coater will protect the printed matters after offset, digital and flexographic printing. All in one unit including the auto fed varnisher, oven and stacker. Its overall dimensions are really contained. The machine has two tanks: the one contains the paint and the other one contains the detergent product, which allows to obtain a quick washing of the rollers once the work is finished. It is also equipped with two levers for a rapid removal of the spreading rollers.
The rotation speed is adjusted by an electronic system. Working width 20 inchesWorking table format 26.8 x 23.6 inchesUV lamp power 7000WMax working speed 170 ft/minEnergy (at 30m/min) 120 W/cm2Varnish tank capacity 4.5 quartsWashing tank capacity 4.5 quarts
PLAST 52 can operate on one or two sides simultaneously. As standard the machine is equipped with a perforating station allowing for manual separation of the sheets; The unit is arranged to take two reels of 1500 m/each, film thickness 25 to 250 micron. All functions are controlled by a digital display computer UV COATING OMM Marchetti Model Odyssey The coater will protect the printed matters after offset, digital and flexographic printing. All in one unit including the auto fed varnisher, oven and stacker. Its overall dimensions are really contained. The machine has two tanks: the one contains the paint and the other one contains the detergent product, which allows to obtain a quick washing of the rollers once the work is finished. It is also equipped with two levers for a rapid removal of the spreading rollers.
The rotation speed is adjusted by an electronic system. Working width 20 inchesWorking table format 26.8 x 23.6 inchesUV lamp power 7000WMax working speed 170 ft/minEnergy (at 30m/min) 120 W/cm2Varnish tank capacity 4.5 quartsWashing tank capacity 4.5 quarts
OMM MARCHETTI
CENTAUR 52
Hand fed Laminator is equipped with adjustable pneumatic pressure roller rolling systemChrome-plated steel main pressure roller All film translation parts are individually adjusted by means of a pneumatic systemThe separation unit is also automatic, easily adjustable to handle films of different weights.Machine is controlled by a computer that controls temperature and working speed. A sensor keeps constant the temperature of the pressure rollers that can reach a maximum of 302°F.The nominal working speed is about 40 feet/minute and it is adjustable.The machine is equipped with the film perforation systemWorking width: 20"Maximum length: 28" if fed automatically, infinite if fed manually.SPECIFICATIONSUnibody Construction.Automatic sheet lamination and integrated separatorTotally pneumatic, in the laminating section and in the tear-off sectionCylinder pressure is adjustable by means of a pressure gauge integrated in the machinePressure separating rollers, driven by pneumatic pistons and a pair of anti curl rollers on delivery side Sheet collection tableThe roller is heated through a 2000 W resistorAdjustable roller temperature.Adjustable machine speedThe sheet feed controlled by a pressure roller, automatically adjustable to allow a perfect overlap of the sheet. Maximum Film roll diameter - 20" of 28 mylar mechanically regulated by friction.Film perforation system, which allows automatic tearing of the laminated sheetMain control with Kw.0 60-Hz 50/60 gear motor - Single-phase electrical connection 240V/50HZ/Single PhaseOptions include auto feeder, three sided trimmer, and receding stacker